Examens De Fin Module Instrumentation Industrielle Électromécanique des Systèmes Automatisées-ESA-OFPPT-PDF

Examens De Fin Module Instrumentation Industrielle Électromécanique des Systèmes Automatisées-ESA-OFPPT-PDF

Examens De Fin Module Instrumentation Industrielle

 ESA-OFPPT-PDF

Theory summary I. Repairing the engine lubrication system…

I.1.Function to be fulfilled Chapter II - Practical work guide TP 1: Periodic maintenance of the diesel engine TP 2: Repair the diesel supply circuit TP 3: Disassembly, control, repair, assembly and adjustment of a injector I.2. Basic concepts on friction I.3. Different types of friction I.4. Evolution of the coefficient of friction in engine operation I.5. Effect of friction I.6. TP3 lubricants. Checking the oil pumps.

 

III.1. Checking the rotor pump. III.2. Checking the gear pump III.3 Checking the Eaton type rotor pump. I.7.Classification of oils I.8.The lubrication circuit I.9 The different elements of the lubrication circuit.

 

II.TP2 Draining the oil and replacing the oil filter ... II.1. Draining the lubrication circuit …… II.2. Oil filter replacement III. Exercise 4: Check and repair the cold start circuit Practical work guide.

 

I. Principle of diesel Fuel system.

TP1 Checking the engine oil pressure ... I.1. Oil level check

I.2. Remove the oil pressure switch …… I.3. Install the oil pressure gauge

I.4. Check the oil pressure ... I.5. Refit the oil pressure switch ...

Chapter I - Summary of theory Preheating circuit Injection pumps

TP 5: Remove and install the injection pump.

TP 6: Checks and adjustments.